SUNLU PETG Pink 175mm 3D Printer Filament 1kg

4.7 (210) · € 14.50 · In Magazzino

Tangle Free & No Plugging Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.High Precision +/- 0.02mm Tolerance 1.75mm PETG 3D filament(Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.Rigid, Tough, High Performance 3D Printing Material 3d filament PETG 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60?C(140?F).Recommended Printing Temp/Nozzle Temperature PETG 3d filament suggest printing temperature is 220-250?C - Base Plate Temperature: 70-80?C if no glue applied.99% FDM 3D Printer High Compatibility Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.SUNLU PETG 3D Printer FilamentSUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.FAQWhy can't the filaments stick to the hotbed easy?1). Check the temperature setting before printing, PETG filament temperature about 220-250;2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
Tangle Free & No Plugging Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.High Precision +/- 0.02mm Tolerance 1.75mm PETG 3D filament(Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.Rigid, Tough, High Performance 3D Printing Material 3d filament PETG 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60?C(140?F).Recommended Printing Temp/Nozzle Temperature PETG 3d filament suggest printing temperature is 220-250?C - Base Plate Temperature: 70-80?C if no glue applied.99% FDM 3D Printer High Compatibility Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.SUNLU PETG 3D Printer FilamentSUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.FAQWhy can't the filaments stick to the hotbed easy?1). Check the temperature setting before printing, PETG filament temperature about 220-250;2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

Bring your projects to life with SUNLU's PETG Filament, featuring a 1 kg spool of 1.75mm diameter printing consumables suitable for most FDM 3D

1kg Spool SUNLU PETG Filament 1.75mm diameter printing consumables suitable for most FDM 3D printers Pink

Elevate your 3D printing experience with our PLA+ series 3D printer filaments. Experience the perfect balance of print quality, and eco-friendly materials.

Over 6kg of PLA Filament & PLA Plus 3D Filaments, 1kg/2.2lbs Australia / PETG / Grey

Sunlu Pla Plus Filament For Most FDM 3D Printer 1 Kg Spool (2.2lbs) Sakura Pink

Process Engineering Equipment, CNC, Metalworking & Manufacturing

SUNLU PLA Meta 1.75mm Filament 1kg Spool – 3docity

Filamento Pla Sunlu Rosado Escarchado Twinkling Pink 1kg 1.75mm

3D Printer Filament - RobotShop

Polymaker PC-PBT Black - 3DJake International

eSUN Flexible TPU Filament 1.75mm 1kg TPU 95A 3D Printer Filament 3D P

ATARAXIA ART PETG Filament 1.75mm,3D Printer Filament,1Kg(2.2lb) tidy winding Spool, Dimensional Accuracy ±0.02mm, with Filament Storage Vacuum Bag, Fit Most FDM 3D Printer, Pantone Match, PETG Gold