Casa
asa 1.75
Polymaker PolyLite ASA 3D Printer Filament 1KG 1.75mm

Polymaker PolyLite ASA 3D Printer Filament 1KG 1.75mm

4.5 (685) · € 13.50 · In Magazzino

PolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications. What is the difference between ASA and ABS? ASA is almost exactly the same as ABS with 1 major difference and 1 minor difference:The major difference is ASA is extremely good at weather resistance. (Resistance to UV light and environmental stress cracking)The minor difference is ASA prints with a nicer matte finish slightly hiding the layer lines. Printing and Drying Settings? Printing Temperature: 240˚C - 260˚CBed Temperature: 75˚C - 95˚CPrinting Speed: 30mm/s - 50mm/sFan: OFFDirect Drive:Retraction Distance: 1mmRetraction Speed: 20mm/sIndirect Drive:Retraction Distance: 3mmRetraction Speed: 40mm/sDrying Settings: 70˚C for 6h(Only if the material has absorbed moisture) Does PolyLite™ ASA requires an enclosed 3D printer? Yes and no, you can watch the reviews below
PolyLite™ ASA is an alternative to ABS with an improved weather resistance. Its UV resistance and excellent mechanical properties make it the perfect choice for real life applications. What is the difference between ASA and ABS? ASA is almost exactly the same as ABS with 1 major difference and 1 minor difference:The major difference is ASA is extremely good at weather resistance. (Resistance to UV light and environmental stress cracking)The minor difference is ASA prints with a nicer matte finish slightly hiding the layer lines. Printing and Drying Settings? Printing Temperature: 240˚C - 260˚CBed Temperature: 75˚C - 95˚CPrinting Speed: 30mm/s - 50mm/sFan: OFFDirect Drive:Retraction Distance: 1mmRetraction Speed: 20mm/sIndirect Drive:Retraction Distance: 3mmRetraction Speed: 40mm/sDrying Settings: 70˚C for 6h(Only if the material has absorbed moisture) Does PolyLite™ ASA requires an enclosed 3D printer? Yes and no, you can watch the reviews below for more information but the rule of thumb is the bigger your print (more than the size of your fist) the more the enclosure will be required for dimensional stability. Spool Dimensions? 1kg cardboard spool:Spool Inner Hole Diameter: 55±1mmSpool Diameter: 200±1mmSpool Width: 65.6±2mmSpool Weight: 140±7g

Polymaker PolyLite ASA White - 1.75mm (1kg) by MatterHackers

Polymaker PolyLite PLA Pro 1.75mm 1KG

Polymaker PLA PolyLite LW-PLA 3D Filament Cardboard Spool Low Density PLA Filament 1.75mm 3D filament 0.8kg/Roll - AliExpress

Polymaker ASA Filament 1.75mm Purple, 1kg ASA 3D Printer Filament, Heat & Weather Resistant - ASA 3D Filament Perfect for Printing Outdoor Functional Parts, Dimensional Accuracy +/- 0.03mm - Green STEAM Alliance