LED Awning Party Light for RV

4.7 (752) · € 20.00 · In Magazzino

These LED awning party lights from RecPro are perfect for use on your trailer! With easy installation, you will have LED lights for your party in no time!
RecPro™ is going to help you bring the party with you wherever you go! When you install our LED Awning Party Light on your RV, you'll light up the campground and keep party going all night long! This eye-catching upgrade for your RV is a simple yet effective piece that can make your rig stand out and adds a much-needed safety feature to your unit. Unlike traditional awning illumination packages, this light is meant to be installed on your RV, beneath the awning! This means you won't have to take the lighting (as you would with other competitor's lights) on and off your rig or plug and unplug it every time you open and close your awning. This kit has been specifically designed for RVs, concession stands, and food trucks. It is an upgrade (as well) from standard IP65 crystal resin-based waterproof strips. Those older models break down over time because they do not stand up to exposure to the elements, even under an awning where exposure is diminished. Our lights (the same the OEMs use for their current units) are made with the fully waterproofed IP68. The strips are encased in an extra sleeve of silicone to give additional protection from the outside. The channel easily mounts to your RV by removing the backing and pressing the 3M tape (attached to the back of the channel) into the area directly under your awning. Once completed, the light strip presses into the compression channel, you hook the reel into an existing power source (switch or 12V source like you would use for a trouble/porch light), and you're ready to go! What's included in this kit: 12' to 25' Feet of 3528x60 IP68 Waterproof LED strip light with 12 Wire lead (1800 Lumen Total) 4 to 7 pc. of UV treated Poly-carbonate strip light mounting channel with REAL 3M tape (Made in the USA) Note: When possible, choose white PCB for white units, Choose Black PCB if your unit is black or tan. How to install: This strip can be mounted in many places, however, the best site for mounting the LED Awning light is just under the Awning extrusion that is fastened to the sidewall of your unit (Please see pictures). This will allow the LED awning light to be hidden and protected when the awning is closed and revealed when the awning is in the open position. This is the most permanent, safest, and easiest place to mount the awning light. When locating the light on the sidewall side of the unit, it produces much better light and will not shine in your eyes while you're sitting on your porch. Select the location where you want to mount the light. Make sure the end with the leads is close to a power source. We suggest starting the wire end of the strip near your porch or scare light so you can pull your 12V power from this source. Clean the mounting surface with a 3M adhesive promoter if possible, if not just use rubbing alcohol. After cleaning, remember to let the area dry and then wipe it down. Next, remove the 3M backer (off of the compression channel) and install all strips end to end along the awning extrusion. Install carefully as this channel will not come off once it has been applied. Next, press the LED strip light into the PC channel. Start on the wire lead end and trim the PC channel on the opposite end if needed. Finally, connect the Strip light wire lead to any 12V switched source and enjoy your new Perfect Glow LED Awning light! Details: Lengths: 12' to 25' PCB colors: White and black LED colors: Blue and white Easy DIY project Channels backed with 3M tape 22g wire Dimmable Technical Data: 12V Up to 50,000 hours of operating life

RV 16' WHITE LED Awning Party Light 12V 110V Power supply included WATERPROOF

DIY) RV LED Awning Light

These LED awning party lights from RecPro are perfect for use on your trailer! With easy installation, you will have LED lights for your party in no

LED RV Awning Party Light with Mounting Channel

PACKAGE INCLUDES: 1pcs 5m(16.4ft) Dc12v Red Led Awning Party Light with Strong Self-adhesive Tape + Female Dc Power Jack and 2m(6.6 ft) Male Dc Wire.

RV Led Awning Party Light, Led Awning Strip Light for Camper Motorhome Travel Trailer Concession Stands Food Trucks, Light Up Canopy Area for BBQ Play

For Dometic 9100 Series 12V 16FT RV Awning Party Bright White Led Light Strip USA

DC12V RV Camper Led Awning Party Light Strip Light Waterproof for RV Camper Motorhome Travel Trailer Caravan Accessories - AliExpress

16.4 FT 5V RV Led Awning Party Light with Mounting Channel & Black Pcb

Accent your living room by placing them behind your TV or any furniture around the house. Put them around the edges of your pool or jacuzzi to dazzle

12V For Camper RV 32ft BLUE LED Awning Party Light Wireless Remote Controller

The Boogey Lights LED awning light kit is designed to attach to the side of an RV, trailer or camper just beneath the awning shining outward. On full power the awning light provides an incredible amount of light. Available in 7 different single colors and four different multi-color versions: RGB, RGBW, RGBA and RGBWW. Offered in a wide variety of lengths. Can be used as a direct replacement for an existing factory installed awning light or added as new.