4.6 (456) · € 11.00 · In Magazzino
* Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender
IPCamPower POE Combiner Splitter Adapter, Run 2 IP Brazil
PoE Combiner & Splitter for Security Cameras
Run 2 IP Cameras over 1 Cable, Kit Includes Sender and Receiver, 30W per Port, Up to 328 Feet, Log In for Dealer Pricing
EL-POE-ISP02 PoE Combiner Splitter Adapter Kit, Run 2 IP Cameras one 1 Cable
EVERSECU POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable, self-Adaptive Compatible with 12/36; 45/78 Powered POE switches and POE NVRs
POE Splitter that works! : r/reolinkcam
Self-adaptive compatible with 12/36; 45/78 powered POE switches (both national standard and non-standard POE switches can be self-adapted) one-to-two
EVERSECU POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable, self-Adaptive Compatible with 12/36; 45/78 Powered POE switches and POE NVRs
Ipcampower POE Combiner Splitter Adapter Run 2 IP Cameras on 1 Cable
Some of the most extreme weatherproof and ruggedized CAT5e Cable you will see on the market. Can withstand virtually all weather conditions. Can literally be installed directly in the ground and buried directly without any conduit needed. Gel Filled and Double Jacketed for Ultimate Moisture Protection. The inner conductors are protected by a tough black UV rated outer jacket. They are further protected by an even tougher inner gray jacket.
IPCamPower Cat5e Cable 1000 Gel Filled Direct Burial Double Jacketed Weatherproof Waterproof UV Rated Solid Copper, Easy Pull Box
Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender Combiner unit and a receiver Splitter unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done! Reduces cabling costs.
IPCamPower PoE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable
IPCamPower 21.5 PoE-Powered CCTV Spot Monitor with Integrated 8 Channel IP Camera Decoder, Compatible w/Most IP Camera manufacturers, Built-In
IPCamPower POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable
Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender Combiner unit and a receiver Splitter unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done! Reduces cabling costs.
IPCamPower PoE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable
EL-POE-ISP02 PoE Combiner Splitter